Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

   ยาสกาว่า อิเล็คทริก ประเทศไทย       
     บริษัท ยาสกาว่า อิเล็คทริก (ประเทศไทย) จำกัด เป็นผู้ผลิตและจัดจำหน่ายหุ่นยนต์สำหรับงานอุตสาหกรรม ซึ่งจัดจำหน่ายสินค้า ประเภท Arewelding Robot and spot welding Robot (งานเชื่อม) , Handling Robot (งานยกของ) , Painting Robot (งานพ่นสี), AC Drive อุปกรณ์ปรับความเร็ว , AC servo drive
  >  หุ่นยนต์
         - งานเชื่อมโลหะ ( Arc Welding )
         - งานเชื่อมโลหะแบบจุด ( Spot Welding )
         - งานหยิบจับ ( Handling )
         - งานบรรจุภัณฑ์          (Picking/Packing/Palletizing)
         - งานประกอบและงานขนถ่าย
         (Assembly & Distributing)
         - งานพ่นสี ( Painting)
         - Laser Welding / Laser Cutting
  >  ระบบปฏิบัติการและวิศวกรรม
  >  เมคคาทรอนิคส์
         - AC Drives
         - AC Servo Drive
         - Controllers


The 6-axis MOTOMAN MA1440 has been
developed in order to achieve optimal
in extremely difficult conditions
and especially 
for the high demands of
arc welding applications.

With it’s increased payload of 6 kg, it’s superior wire feed
system, the maximum working range of 1440 mm and
integrated media hose package, the 6-axis robot MA1440
significantly improve welding quality. This enables the
simple machining of bulky and hard-to-access work pieces.
The fast motion sequences reduce welding cycle times.
The torch cables are integrated in the robot arm in order
to avoid collisions with the work piece or other robots.
This not only ensures greater accessibility to the devices;
the reduced torsional and flexural loads on the torch dress
package also result in less wear. Additionally, the possible
number of robots in the production cells can be increased
considerably. The hollow wrist from 42 mm was extended
to 50 mm, and the rate of the flange to B-axis from 200 mm
has been reduced to 100 mm. Further new features are
the integration of the power cable as well as the air
connections in the base and an enlarged turning range
of more than 340°.

Key benefits

  • Expanded diameter of hollow wrist (42 to 50 mm)
  • High speed shortens the air cut time and eliminate
    the air cut time
  • Doubled payload compared with other models in
    its class
  • Servo torch and censors can be installed
  • Can be used in the welding process is used more
    large robot
  • Streamlined arm is based on industrial design
    eliminates the interference with jig
  • Industrial design arm prevents the invasion of spatter
    and makes the maintenance easy
  • Possibility of additional medium
    (Power cable, air connections, ect.)

Technical Data

Controllerd axes
6 kg.
Maximum reach P-point
1440 mm
±0.08 mm
130 kg.
Power requirements
1.5 kVA
Mounting postions
Floor, Wall, Ceiling
Arc welding

Maximum speed

S-axis 230 º /sec
L-axis 200 º /sec
U-axis 230 º /sec
R-axis 430 º /sec
B-axis 430 º /sec
T-axis 630 º /sec

The perfect match

Robot controller   DX200  




Please enter your contact number

This number will be used by supplier for communication
E-mail address
Mobile No